AK Rifle Sights

Note: Before ordering an AK sight,
please read through our FAQ to determine the best model for your rifle.
(U.S. Sales only – No Foreign Sales)


Click Here to view FAQ (PDF format)

Features

  • “GI” type post and aperture sight picture.
  • Nearly doubles sight radius.
  • Detent locking click adjustments.
  • No tools required for field stripping.
  • Easy conversion with no permanent modification to firearm.
  • Patent #US 7,882,655 B1.

Technical Information

Testing results done by an independent individual. Click Here to open report in PDF format.

Assembly Instructions – PDF file. Click Here.

Parts Sheet and Adjusting Instructions – PDF file. Click Here.

New Cover Removal Technique – PDF file. Click Here.

model compatibility chart

  • Our sights will fit most stamped and milled AK receivers even if they aren’t on the chart.
  • Our sights are not compatible at this time with the new Palmetto State Armory AKs (PSA) because of their unique rear trunion design.
  • Our sights are not compatible with AKs that have a hinging dust cover.
Bent wire recoil spring guide and telescoping tube & rod spring guide.

Bent wire recoil spring guide and telescoping tube & rod spring guide. If your rifle has a telescoping tube and rod type recoil system, as shown on the bottom of this picture, you will need to purchase a TS00208 Retaining collar and a TS00209 Moveable guide rod. You can use your existing spring or can purchase a new one – TS00212 Recoil spring. These 3 items are available at the bottom of this web page under “You May Also Like”.

 

Retaining collar details.

Retaining collar details.

How to Install and Remove Tech-Sights AKCover Video


Share:


Testimonials

video_review_iconAK Tech-Sights YouTube Video Review

NUTNFANCY recently did a review of our Tech-Sights for the AK rifle. To visit YouTube and watch the video, click here!

nutnfancyVideo courtesy of The Nutnfancy Project. See www.youtube.com/nutnfancy for other high quality, unbiased gear reviews and gear adventures. Used with permission.

 


Hello folks at Tech-Sights,
I recently purchased an AK -47 Sight System from you…. In spite of the variety of manufacturers, extremes in tolerances and quality that can be encountered in the AK family of Rifles, I must report that I was VERY surprised at the ease of installation of your system. My installation was on an M70 Yugoslavian Rifle. The Sight fit EXACTLY into the Machined slot at the Rear of the receiver with no need for the supplied allen type adjustment key to be utilized….the supplied Receiver Cover fit perfectly with no movement. The Finish on the supplied Receiver Cover matched the finish on my Rifle exactly.At the Range the sight adjustments were easy and precise, allowing that familiar “GI” Sight Picture. Although more accurate than most people are led to believe, I feel your Sight System allows one to easily achieve the accuracy potential of the AK-47 rifle. My M70 is now shooting 1 ¾ to 2 ¼ inch groups at 100 Yards with Ball Ammunition. There is no doubt that this is attributed to the improved sight picture and increased sighting radius.The supplied instructions are easy to follow and anyone should be able to complete the install at home. The Sight is well constructed and allows a much greater accuracy potential over the “as issued” sights.I would strongly recommend this sighting system to anyone who owns a Kalashnikov type rifle.Congratulations on a Superior accessory for the “Kalashnikov”.
Sincerely,
M.K. Vandergrift, PA


I originally ordered a Tech Sight to upgrade the AK-47 that I was issued in Afghanistan. I found it to be rugged, dependable, and easy to install. More importantly; the Tech Sight narrows the eye-relief distance from the original AK-47 sights, allowing the shooter to shave off valuable sight acquisition time during a contact. I found the Tech Sight to be so valuable in this regard that I eventually outfitted our entire team’s AK-47s with the Tech Sight.
Steve B.
Security Contractor, Sept. 2013


Hi Folks,
Wanted to provide positive feedback on your AK-47 sight.  I have previously purchased your SKS sights and they are terrific.  Since I just purchased a Pre-ban Norinco AK-47, I decided to install your model for that firearm.
I followed all your video and written instructions and (after a bit of filing), they fit perfectly!  Went to the range yesterday, sighted them in at 100 meters and then proceeded to ring the metal plates with ease.  I also introduced those around me to the sight system and showed them one of my SKS’s with a Tech-Sight on it.  Great interest in both.
You make a great product, so keep it up.
All the best.
Matt W., North Haven, CT  August 2016


I used AK Tech Sights in Finnish Brutality 2019 competition. They worked extremely well. During 2 days I had under 10 misses on metal targets and they were all my fault due to physical exhaustion and bad visibility. I dragged the gun through gravel and sand and banged it without mercy. The sights held zero.
An excellent product.
Kimmo – August 2019


AK100S – Aperture Sight for AK47 – $110.00

  • Windage adjustable w/dual flip aperture and standard length cover.
  • For all AK47s except Yugoslavian Model.

$110.00Add to cart

AK100Y – Aperture Sight for AK 47 – Yugoslavian – $110.00

  • Windage adjustable w/dual flip aperture and shorter cover.
  • For AK47 Yugoslavian Model.

$110.00Add to cart

AK200S – Aperture Sight with Elevation for AK47 – $125.00

  • Windage and elevation adjustable w/ single aperture and standard length cover.
  • For all AK47s except Yugoslavian Model.

$125.00Add to cart

AK200Y – Aperture Sight with Elevation for AK 47 – Yugoslavian – $125.00

  • Windage and elevation adjustable w/ single aperture and shorter cover.
  • For AK47 Yugoslavian Model.

$125.00Add to cart

You May Also Like