Ruger Mini Rifle Sights
Ruger Mini 14, Mini 30 and Ranch Rifles
- All Steel Construction
- Easy Click Adjustments on Elevation
- Easy Click Adjustments on Windage
- Standard .062 Aperture
- Optional Aperture Sizes Available with IRAS Aperture System
- Easy installation
- Replaces the fragile Fold Down Aperture on pre 2005 Ranch Rifles
- Adds adjustment ease to the 5800 series produced from 2005 to present
PDF File of Assembly Instructions for MINI200 and MINI200R – Click Here!
VIDEO REVIEW
Watch an in depth video review of this sight! CLICK HERE!
Share:
 |
 |
| Pre 2005 Ranch Rifle with original sights. | Pre 2005 Ranch Rifle with MINI200R Tech-SIGHT installed. |
|
|
 |
| 5800 Series Mini 14 / 30/ Ranch Rifle with original sights | 5800 Series Mini 14 / 30/ Ranch Rifle with MINI200 Tech-SIGHT installed |
Mini 14 and 30 Rifles (Pre 2005)
- All Steel Construction
- Spring Preloaded Assembly eliminates aperture wiggle present in original sight design
- Easily adjusted for Windage and Elevation – 1/2 MOA Windage, 1 MOA Elevation
- Standard .062 Aperture
- Optional Aperture Sizes Available with IRAS Aperture System
- Easy installation
- Detent Locking
- Better sight picture and Field of View for faster target acquisition
PDF File of Assembly Instructions for RR200 sight – Click Here!
Selector and Purchasing Chart
|
MINI200Fits 5800 Series Mini 14’s & Ranch Rifles Manufactured after 2005. |
$65.00Add to cart |
|
MINI200RINCLUDES: |
$69.00Add to cart |
|
RR200Fits Mini 14 & 30 Rifles Manufactured before 2005. |
$65.00Add to cart |
FAQ’s
Q – Why does the Ranch Rifle manufactured before 2005 require a different Tech-Sight?
A – It uses the same MINI200 sight but requires an adaptor kit.
Q – Do I need one of your tools to adjust the MINI200 or MINI200R sight and if so which one?
A – The windage can usually be adjusted with your fingers and if it is a little stiff a penny in the slot of the windage screw will work. The elevation dial can be moved with a pointed object like the tip of a golf tee or bullet tip. The TS211 has a small spanner wrench on it that will work on the elevation dial and the windage knob so it makes the job easier.
Q – Do I need one of your tools to adjust the RR200 sight and if so which one?
A – The windage can be adjusted with the knob on the left side of the sight. The TS211 tool will not work with the RR200 because the ears are too close together, but the elevation dial can be moved with a pointed object like the tip of a golf tee or a bullet tip.
Testimonials
The installation of the new sight on my Mini-14 took all of 5 minutes and couldn’t be any easier. It is definitely an improvement over the stock sights. I like that I now have now have the ability to quickly adjust my sights should I change ammunition, or need to adjust for changes in distance or wind. Plus, this is a high-quality, rugged sight. Excellent work folks.
Henry B., Phillipston, MA (Sept 2016)
Just wanted to compliment your RR200 sights for the Mini14. It arrived in a timely manner and went on the rifle in less than 5 minutes. Much better than the factory peep sight and after just a day of shooting I’ve noticed much tighter patterns thanks to the narrower optic. It looks good, shoots good, and with one of your slings it makes the already unique looking rifle look that much better. Thank you for your time and stay safe in all the goings on out there.
John L. (April 2020)
I purchased the Mini200 rear sight for my Ruger Mini 14. I’m 68 years old and decided to give it a try. Let me tell you, I shot 6 rounds to sight in the rear sight. Then I shot 20 plus rounds, all in the bullseye! What a great improvement. Thanks a million.
Stirling G. (December 2022)
