Description
FEATURES:
- 8″ Longer Sighting Radius
- Rear Sight Base mounts solidly to the rear of the receiver utilizing the existing tapped scope base holes.
- TSR100 comes standard with dual apertures (.062) and is compatible with M16/AR15 apertures.
- TSR200 allows for additional elevation adjustment at the rear sight.
- Uses incremental windage adjustment with rugged detent locking.
- Front sight tower comes standard with an incremental detent adjustable AR15 type post designed for the AR15. This gives the shooter a wide variety of post designs.
*These sights will also fit the old model Ruger 44 Magnum Carbine.
DOCUMENTATION:
AS SEEN ON
admin –
What a sight!!! In the past twenty five years I have tested and evaluated hundreds of firearms accessories including dozens of sighting systems for magazine articles. I could honestly say “finally, someone came up with truly affordable, extremely functional and incredibly rugged precision iron sights for the 1022 and SKS. Knowledgeable shooters who admire a quality product specially designed to match or exceed those devices found on high end precision rifles will truly appreciate the Tech-Sight systems. After testing and evaluating the Tech-Sights installed in my own rifles compared to other similar devices out there, I can only say one thing – “Nothing even comes close”. My grouping easily shrank by half from 25 to 100 meters – incredible improvement in accuracy, thanks to those clear sight pictures. I believe in giving credit to where credit is due. So affordable, yet very sophisticated. Tech- Sight products are indeed the very best there is that is available for the 10/22 and SKS rifles. I look forward to see more innovations from you.
J.M. Ramos – Author
Tactical Ruger 10/22 (Paladin Press)
admin –
I just wanted to thank you for super service and a fantastic product. I ordered a TSR-100 sight system for my my Ruger 10/22 last week. I received and installed it Saturday. The installation was super easy and took less than 15 minutes.
I took it shooting today and I’m amazed with the improved sight picture. I am by no means an expert shooter, but I easily cut my groups at 25 yards in half, compared with the stock Ruger open sights.
Thanks again from a satisfied customer. When I get that SKS I want, I WILL be in touch.
S.J.
Chesapeake, VA
admin –
Hello,
I received my TSR200 sights a few days ago. After mounting according to the directions, snugging everything up, I went to the range yesterday. I must say these sights are THE BEST THING SINCE THE 10/22 WAS INVENTED!
I set this rifle up to shoot at 25yd AQT targets and my buddy is doing the same thing. We want to shoot more and save the centerfire ammo. To obtain an initial zero, I shot off of a rest at 25yds, was getting one hole groups. I have scoped, bull-barrel 10/22s and this one shoots as well as the others with your sights!
I want to thank you for a product that Ruger should have put on the 10/22 when it was introduced. You folks have made plinking and training fun again! Now, I hope you would introduce some sights similar for the 77/22, if the demand was great enough. Maybe something that fit on the back scope mount on the receiver!
Anyway, thanks much and I can’t wait to get back to the range!
E. S.
Morganton, NC (December 2007)
admin –
Attention Tech-Sights,
I placed my order and received my sights the first week they were available for sale.
If you have not received any feedback on your sights yet let me be the first!
YOU HAVE PRODUCED THE BEST UPGRADE FOR THE RUGER 10/22 IN WELL OVER A DECADE ! NOT ONLY HAVE YOU MADE A GREAT PRODUCT BUT YOU HAVE PUT THE FUN BACK IN SHOOTING!
I installed your sights on one of my older .22 (27 years old to be exact) on our trip to the range with all our buddies with all our high dollar this and power custom that, my old .22 with your new sights was the hit of the day and got TWO FULL BRICKS fired through it! No one could put it down. Just when that poor old .22 thought it was going to get a rest, someone else was putting another 50 rounds through it.
Thank you for all the great effort that you put in to these sights and I hope you sell a million of them!
Your new friend in Arizona,
Glenn
admin –
Good day,
I just wanted to write to thank you for making my 10/22 fun again. I’d built up a scoped, heavy barreled rifle, with trigger job, and then I decided that shooting with a scope was dull.
A month or so ago I ordered your TSR100 with bull barrel adapter and I am very, very pleased with the results. This thing is a tack driver with great balance. The sights work perfectly at 50 and 100 yards.
Thanks again.
C.V.
Brookings, SD
admin –
Time and time again we get shooters who have sworn off iron sights. After talking with some of them we realize the only experience they have is with standard factory sights. For the most part the manufacturers are under the assumption that the sights will be replaced soon after with an after market scope, so little design is put into this crucial part of the rifle.
Tech-Sights pick up where the gunsmiths leave off. You will be surprised how accurate you can shoot with them!
It has made believers out of student after student in our classrooms. We simply wouldn’t rely on anything else to earn a living with.
Frank Melloni
TOP SHOT – Season 4 Competitor
Renaissance Firearms Instruction – Owner / Lead Instructor
Leighton Pharr Jr –
Sorry about taking so long to do a review on this wonderful product (I’ve owned mine for over two years now) I’ve just had too much fun playing with my 10/22TD. Along with the upgraded sights I also added one of Rugers target triggers at the same time. This sweetheart actually thinks she’s a bull barreled target rifle, and I just don’t have the heart to tell her different. At 25yds she cuts one ragged hole all day long regardless of load. At 50yds with CCI high velocity loads she’ll keep everything inside 1/4″ as long as the Oklahoma winds co-operate. I just found out that Tech-Sights is offering reduced size apertures, so I’ll be ordering these to try out on my little sweetheart to see what magic she can perform!!! Tech-Sights keep up the good work, and come out with some sights for the Henry Rifles!!!!
Thank you,
Leighton
Ryan Kennelly –
There are many different sights for the 10/22 platform. I like classic battle sights. When I saw that you offered different size peep holes, it was easy to make my choice the TSR-200. The install was clean. The solid model drawings in the instructions are clear and make set up a snap. After about 20 shots I had my sight picture perfect. My favorite target is spent shotgun shells standing on end. I was picking them off at 25 yards with little to no effort. At 50 yards I was holding 1” groups. I handed the rifle to my friends and now they are addicted to battles sights.
(Note) the TSR-200 sights are installed on my 10/22 takedown. I have no problem getting the rifle to return to zero after repeated takedowns and field strip cleanings. I would recommend this set up to all takedown users.